Seven Essentials to Increase Sprinkler Life

In all parts of the country under the requirements of the regional government, in order to the environment is getting better and better, each construction site are required to be equipped with sanitation sprinkler, so now the country's regions in large quantities of procurement of sanitation sprinkler. So, how can this “city beautician” long life, can continue to fight is particularly important, then I share with you the daily maintenance and repair of green sprinkler.

1: Sanitation sprinkler requirements for water sources When the green sprinkler uses the river ditch, pond as a water source, the end of the suction pipe needs to be completely submerged in water. In order to avoid inhaling stones or more sediment, floating debris, the end of the suction pipe is generally equipped with a filtering device, it is strictly prohibited to remove the filtering device. It is recommended to replenish the water to the deeper water source, if the water source is shallow, you need to dig deeper at the suction place beforehand to ensure that it does not contain debris and does not enter the air. Different sprinkler pumps on the water source requirements are different, clear water pumps require that there can be no impurities in the water, turbid water pumps require that the water can not have stones and too much sediment.

2: sanitation sprinkler water inlet pipe needs vacuum status

Sanitation sprinkler suction water inlet pipe system must maintain a certain degree of vacuum, in order to suck the water into the box. The intake pipe system must be sealed and reliable, the hose can not be broken, and the hard pipe can not be cracked, otherwise it will produce air leakage, which will cause the situation of sucking water.

3: Sanitation sprinkler pumping before the need to add priming water

Centrifugal sprinkler water pump each time before suction, you must add a certain amount of priming water to the water pump, and you must close the water port after adding. Self-priming water pumps need to add priming water when used for the first time, and then do not need to add priming water.

4: sanitation sprinkler winter must release water

Before winter comes, the water pump and the water pipe should be emptied to prevent freezing and cracking. The northern part of our country is generally no longer constructed in winter, so after the construction is over, the water pump and water pipe will be emptied immediately to prevent future problems.

5: sanitation sprinkler parking must hang the parking block

Sprinkler whether in the suction before, or in the sprinkler before, pickup device gear must be in parking.

6: Sanitation sprinkler back to the field after maintenance

Clean the sprinkler. Check and add fuel, lubricant and coolant. Check the tightness of the fan, water pump and other belts, inappropriate timely adjustment. Check the air pressure of tires and the sealing condition of each gear box. Check and organize the accompanying objects.

7: Sanitation sprinkler regular drainage

Sanitation sprinkler water tank is equipped with a sewage pipe, the inlet of the tank is the lowest point of the water tank. After a period of time, an occasional check to open the sewage pipe switch, the tank accumulated debris excluded, until the water becomes clear.